What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
11.06.2025 06:25

a photo is worth a thousand words.
But… the neutral is now “floating” because of the 1 ohm resistance.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Spotify Just Upgraded Its App with Some Cool New Features - Gear Patrol
He then describes Rainy Season and Lightning.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
The other is “what does a “fuse” do?”
Why the end of Google as we know it could be your biggest opportunity yet - ZDNet
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Upvotes:
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
This device then solves the entire problem.
nine
Why is it difficult to get a job?
There are three different concepts here that are getting confused.
so, what happens?
Barnstars:
2024–10–14 [Omar Gharbi Omar Gharbi ]
There are two important concepts here.
but this device (an Inductor) … impedes the rapid changes in the current.
Has your wife or girlfriend ever been felt up in public by a stranger?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Leprosy Was Lurking in The Americas Long Before Colonization, Study Finds - ScienceAlert
This is where this question deviates from being a 'generic' question, and becomes more specific.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Here is a simplified AC power diagram.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
It also is a device that limits the change in current flow.
Mark Hamill Say Carrie Fisher Told Him to Embrace His Star Wars Fame - Variety
the problem then depends on "how fast does the fuse operate?".
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
2024–10–16 [ OO OLAOYE OYEBODE ]
Resident Evil surprise return announced by PlayStation - GAMINGbible
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
These are simplified answers to the original question, and does not change anything I wrote above.
Who are some of the best Korean Actresses?
The third is lightning and “how it gets conducted into a home.”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This 1 Kitchen Tool Can Help You Cut Back On Oil & Calories, Dietitian Says - TODAY.com
2024–10–10[John johnson John Johnson ]
eight
(Dc diagram shown, AC is similar).
What a list actors/ actresses are notorious for being jerks in real life?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
He then asserts :
[image of Common-mode choke]
What is lightning?
The bolt then partially travels down the line to your home.
A circuit breaker is similar, but is resettable.
An AC voltage/ current source, and an ac inductive load.
At one ohm, the resistor has a maximum of 1 watt power.
For this case there are devices called Metal oxide varistors (MOV).
At least they know the answer if they wanted it.
One is “what exactly is in a ‘surge protector’ ? ”
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Edit 2024–10.
Because the load is inductive, the current lags the voltage.(by a bit).
This is where the MOV conducts again, and dissipated the energy.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
A fuse is a non-resetable over current circuit protector.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
what exactly is a ‘surge’ protector?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
So, the voltage could go up to 500 volts, and the fuse will not open up.
One
In schematic diagrams this is the symbol for a fuse:
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
What does a fuse do?
First Sentence:
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
[old diagram got deleted by accident]
but I think this circuit , shows a few more pieces.
But it can get overloaded, and no longer works.
He then describes the function of a fuse.
It seems Mohan does not understand the difference between a comment and an Answer.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Now when you have a certain ac resistance, then a current flows in a loop.
I post the exact comment here.
This one hit behind the barn.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is 'the assistant's answer'
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.